Stick-on ND filter for DJI Action 2 – Camera Butter
Por un escritor de hombre misterioso
Descripción
Premium quality stick-on, low profile ND Filter for the DJI Action 2 camer; ;Available in ND4, 8, 16 and 32. Made from top quality optical glass. It uses a unique peel-and stick backing that you can remove and re-apply. Available for the Action 2 in ND4, ND8, ND16, ND32
Premium quality ND Filter for the DJI Action 2 camera Available in ND4, 8, 16 and 32. Also available in 3-piece multipacks: ND4, 8 and 16 or ND8, 16 and 32. Producer pack (see below) is also available. Before you buy, please read the compatibility note below. Super high quality, low-profile stick-on neutral density filter for the DJI Action 2 camera made from top quality optical glass. It uses a unique peel-and stick backing that you can remove and re-apply.. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it! The adhesive only covers the edges of the glass so it does not impede the crystal-clear quality. Unlike other ND filters for the Action 2, these do not need a special bracket or mount, and do not use a magnetic attachment, so they say on! High quality, 1mm thick hardened glass that is nano-coated for: anti-scratch repels water repels fingerprints anti-reflection Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello. ND transmission: ND4 (ND 0.6) 25% transmission (cloudy, overcast) ND8 (ND 0.9) 12.5% transmission (some sunlight) ND16 (ND 1.2) 6.25% transmission (bright sunlight) ND32 (ND 1.5) 3.125% transmission (very bright sunlight The Producer pack contains: 1 x ND4 2 x ND8 2 x ND 16 2 x ND32 3-Pack of replacement adhesives Important compatibility notes: If you use a TPU mount for your camera, ensure that the hole in the front is large enough to fit the filter (it must be at least 32mm). Some TPU mounts that require the camera to be inserted from the side may not be compatible if they are not wide enough on the side to fit the camera and the filter (which sticks out another 1.5mm). Most mounts from Brain3d are compatible, however if you are not sure, contact them to confirm. This filter is compatible with the DJI magnetic case.
Premium quality ND Filter for the DJI Action 2 camera Available in ND4, 8, 16 and 32. Also available in 3-piece multipacks: ND4, 8 and 16 or ND8, 16 and 32. Producer pack (see below) is also available. Before you buy, please read the compatibility note below. Super high quality, low-profile stick-on neutral density filter for the DJI Action 2 camera made from top quality optical glass. It uses a unique peel-and stick backing that you can remove and re-apply.. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it! The adhesive only covers the edges of the glass so it does not impede the crystal-clear quality. Unlike other ND filters for the Action 2, these do not need a special bracket or mount, and do not use a magnetic attachment, so they say on! High quality, 1mm thick hardened glass that is nano-coated for: anti-scratch repels water repels fingerprints anti-reflection Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello. ND transmission: ND4 (ND 0.6) 25% transmission (cloudy, overcast) ND8 (ND 0.9) 12.5% transmission (some sunlight) ND16 (ND 1.2) 6.25% transmission (bright sunlight) ND32 (ND 1.5) 3.125% transmission (very bright sunlight The Producer pack contains: 1 x ND4 2 x ND8 2 x ND 16 2 x ND32 3-Pack of replacement adhesives Important compatibility notes: If you use a TPU mount for your camera, ensure that the hole in the front is large enough to fit the filter (it must be at least 32mm). Some TPU mounts that require the camera to be inserted from the side may not be compatible if they are not wide enough on the side to fit the camera and the filter (which sticks out another 1.5mm). Most mounts from Brain3d are compatible, however if you are not sure, contact them to confirm. This filter is compatible with the DJI magnetic case.
ND Filter Set for DJI Action 2
PGYTECH ND/PL Filter Set for DJI Action 2 (4-Pack)
Camera Butter Stick On Reusable Glass ND Filter for DJI Action 2 - Cho from WREKD Co.
Minimalist GoPro Mounts – Fly High FPV
The best GoPro ND Filters for GoPro Hero and GoPro Session – Camera Butter
ND Filter for the GoPro Hero 8 but also works on the iPhone 11Pro and Sony rx100: Camera Butter
ND Filter Set for GoPro Hero 9, Hero 10, Hero 11, 11 mini, Hero 12 & Hero Black Bones – Camera Butter
The FPV Shopping List - GoPros & Other FPV Accessories - FPV KNOW-IT-ALL - Joshua Bardwell
Make the best FPV system ever better! High quality Neutral Density filter and Circular polarizing filter made to fit the DJI FPV System (NOT the DJI
ND filter for DJI FPV System
Pro quality optics and Made for Action, Made from incredibly strong Corning Gorilla Glass and ultra premium ND coatings, these ND filters for the DJI
DJI O3 Air Unit ND filters and Lens protectors
(Try our NEW upgraded Black Diamond Stick-on filters for the GoPro Session 4/5 here.), Premium quality ND filter For GoPro Session 4 and 5. Available
Glass Stick-on ND filter for GoPro Session 4/5
LENSKINS 4-Pack Lens Filter ND8 ND16 ND32 CPL for GoPro Hero 8 Black, Neutral Density and Circular Polarizer Lens Filter Kit Lens Protector for GoPro 8 Black Accessories : Electronics
Premium quality ND Filter for the DJI Action 2 camera Available in ND4, 8, 16 and 32. Also available in 3-piece multipacks: ND4, 8 and 16 or ND8, 16
Stick-on ND filter for DJI Action 2
de
por adulto (el precio varía según el tamaño del grupo)